Product Page: DIR-601
Hardware Version: A1  Firmware Version : 1.00NA
Setup Advanced Tools Status Support

Network Settings

Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Router Settings

Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Router IP Address :    
Subnet Mask :    
Device Name :    
Local Domain Name :    (optional)
Enable DNS Relay :  

DHCP Server Settings

Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network.

Enable DHCP Server :  
DHCP IP Address Range :    to
DHCP Lease Time :     (minutes)
Always Broadcast :   (compatibility for some DHCP Clients)
NetBIOS announcement :  
Learn NetBIOS from WAN :  
NetBIOS Scope :    (optional)
NetBIOS node type :  Broadcast only (use when no WINS servers configured)
 Point-to-Point (no broadcast)
 Mixed-mode (Broadcast then Point-to-Point)
 Hybrid (Point-to-Point then Broadcast)
Primary WINS IP Address :   
Secondary WINS IP Address :   

Add/Edit DHCP Reservation

Enable :  
Computer Name :   <<
IP Address :   
MAC Address :   
   
      

DHCP Reservations List :

Enable Host Name MAC Address IP Address

Number of Dynamic DHCP Clients : 2

Hardware Address Assigned IP Hostname Expires    
00:22:b0:6c:e0:2a
192.168.0.101
dlink-6CE02A
Thu May 7 16:54:23 2009
Revoke
Reserve
Helpful Hints…

If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck Enable DHCP Server to disable this feature.

If you have devices on your network that should always have fixed IP addresses, add a DHCP Reservation for each such device.

More…