Firmware Version: 1.12
Hardware Version: A2
Product Page: DIR-855
Setup Advanced Tools Status Support

Network Settings

Use this section to configure the internal network settings of your router and also to configure the built-in DHCP Server to assign IP addresses to the computers on your network. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

Router Settings

Use this section to configure the internal network settings of your router. The IP Address that is configured here is the IP Address that you use to access the Web-based management interface. If you change the IP Address here, you may need to adjust your PC's network settings to access the network again.

(optional)

DHCP Server Settings

Use this section to configure the built-in DHCP Server to assign IP addresses to the computers on your network.

(minutes)

(compatibility for some DHCP Clients)

(optional)


Add DHCP Reservation

<<

DHCP Reservations List

Enable Computer Name MAC Address IP Address

Number of Dynamic DHCP Clients:3

Hardware AddressAssigned IPHostnameExpires
e9:eb:b3:a6:db:3c192.168.0.19417 Hours 55 Minutes Revoke Reserve
e1:6c:d6:ae:52:90192.168.0.19517 Hours 55 Minutes Revoke Reserve
00:04:23:2c:44:9f192.168.0.199End_User17 Hours 29 Minutes Revoke Reserve
Helpful Hints...

If you already have a DHCP server on your network or are using static IP addresses on all the devices on your network, uncheck Enable DHCP Server to disable this feature.

If you have devices on your network that should always have fixed IP addresses, add a DHCP Reservation for each such device.

More...